[ROM][PMEM][JB][4.3][JSS15Q] CyanogenMod 10.2 by ADC Team - Alpha 1 - Kernel 3.4.x

September 8, 2013, 2:17 am

≫ Next: [GT-i9001][ROM][JB4.3][OFFICIAL]PAC-man ROM [CM/AOKP/PA]~17-09-13~

≪ Previous: [ROM] [AOSPA 4.3 JSS15J] ParandoidAndroid 3.99 | Halo 2.0

Hi everyone,
We are back! And we are proud to present our build of CyanogenMod 10.2 for the Galaxy S Plus (GT-I9001).

Currently the team is composed by the following members: (in alphabethic order)

[Dev] CastagnaIT, Christopher83, Educk, Ivendor, Krislibaeer
[Tester] smeroni68, ktulu84, Xellar

What's working:
Audio
Receiving and making calls
GPS
Compass
Proximity sensor
Wifi
Bluetooth
USB mass storage
HW accelerated gui
HW accelerated video
Camera
BLNv9
USB/Wifi tethering
VSync
USB OTG (Only FAT32 support)
Phantom key presses filtering

Partially working:
Some graphical glitches in Panorama preview

Screenshots

CM10.2Installation Guide

Note: CM for Galaxy S Plus is provided with no warranty. You are installing this software at your own risk. You may be violating your warranty.

Download CM10.2 and gapps-jb zips and put them in /sdcard

20130907 Initial release (Alpha 1) (DL from Dev-Host)
MD5SUM: b5554df90641743f46ff851579ce82e3

20130813 GApps (DL from Goo.im)
MD5SUM: 1f51b5cc6370c1f45dc951109b6ce6ed

Please verify the md5sum to be sure you got the right one.

Before you install CM10.2: Preparation (First three are optional. If you want to start fresh, these can be skipped)

Install AppBak from Market, run it and save a list of all your apps.
Install SMS Backup and Restore from Market, run it and backup your SMS history.
Install Call Logs Backup and Restore from Market, run it and backup your call log history.
Boot into recovery. Make a full backup. You will need this backup later if you decide to go back to your previous ROM and data.

WARNING: Many apps will Force Close crash if you restore data from a previous ROM.

Install

Here you can find the CWM Recovery and TWRP builded by our Team (credits to Educk for CWM and krislibaeer for TWRP):

CWM-6.0.2.8-ariesve-20130627.zip (CWM 6.0.2.8 Recovery for NORMAL phones, not bricked)

TWRP-2.6.0.0-ariesve-20130711.zip (TWRP 2.6.0.0 Recovery for NORMAL phones, not bricked)

WARNING: We builded and tested these recoveries, but always remember that we are not responsable for any damage by using these software!!
They are based on safe kernel on emmc side!!

WARNING: We recommend to reboot into recovery from ROM or within recovery to avoid unexpected recovery shutdowns!
Wipe data and cache.
Flash update*.zip.
Flash gapps*.zip. You must flash gapps after every upgrade to CM10 since /system is formatted, wiping your previous add-ons.
Reboot phone.
After you setup your Google account, reinstall the three apps from Market in order to restore most of your apps, call log and SMS history.

WARNING: Do not restore backup data of system apps!

If you restore a bad backup with cached settings in telephony.db in data/data/com.*.*.telephony it can break MMS.
It seems that restoring backups can also break Calendar sync.

Upgrades
Upgrades from previous versions of CM10.2 are the same process as install, except you do not need to wipe anything. Contrary to popular belief, you do not need to even wipe cache and dalvik-cache when upgrading between CM10.2 versions. You only need to wipe if you are doing a major upgrade, switching to a different ROM entirely, or attempting to fix bugs caused by bad backups or corrupt app data.

Credits
CyanogenMod Team
Arco68 for his huge work for our device
AriesVE Dev Connection Team
Nello96 for Team logo's
anakin174 for the team spare phone

Sources
All our sources are on AriesVE-DevCon-TEAM GitHub

FAQ

For recovery bootloop problem you should at this post
BLNv9 feature recap:
- It is activable/deactivable from BLN Control Application (Free or Pro version)
- You can launch it from Settings->Device->Advanced
No System Sounds UI:
- Download this app
- Set the system volume to maximum (7). You should hear the sounds again.

↧

[GT-i9001][ROM][JB4.3][OFFICIAL]PAC-man ROM [CM/AOKP/PA]~17-09-13~

September 16, 2013, 3:37 pm

≫ Next: [ROM][4.3 JLS36G][GCC 4.7] UNOFFICIAL Carbon [BETA] [WEEKLIES]

≪ Previous: [ROM][PMEM][JB][4.3][JSS15Q] CyanogenMod 10.2 by ADC Team - Alpha 1 - Kernel 3.4.x

PAC-man ROM is a combination of the three Super ROMs Available
Paranoid Android + AOKP + Cyanogenmod = PAC-man

This ROM packs all the tweaks from the three super ROMs into one.
Why choose among ROMs, When you have All-in-One !!

Code:

* All in One Rom [PA, AOKP and CM] * PhoneUI, TabletUI, PhabletUI * Latest Version Nightly Builds * All Feautures from PA * Some Features from AOKP * All Features from CM * Parts from Slim Bean * Parts from Rootbox * Parts from Carbon * Basically if there is a cool feature out there and its open source, then we will try to bring that feature into PAC-man * Of course JellyBean 4.3

Code:

23.0.0 -> 4.3 Dropped Numer Changelog System [bluefa1con & Papa Smurf151] Upgraded to Android 4.3 [Bkjolly & bluefa1con & Goldflame0 & g2user & Mithun46 & Owain94 & slz.kiev & Sniper & wedgess & zyonee] Update all CM, PA & AOKP commits [Goldflame09 & slz.kiev & wedgess & zyonee] Added Halo colors [C457 & Owain94] Removed Goo Manager [Goldflame09 & Singh_dd93] Added PAC Console app [pvyParts] Added PacPapers [Papa Smurf151 & pvyParts] Mass Reorganisation off all settings and removal of separate Rom control [Owain94] Added status bar weather from AOKP [Owain94] Merged PAC in Black [Singh_dd93] Added new boot animation [One2thTexan] Changed to new default wallpaper [One2thTexan] Swapped AOKP performance control for CM [Owain94] Animate Developer Partition icon [pvyParts] Added Partition information settings [Owain94] * Full Changelog * Nightly Changelog

Code:

* You tell me

Code:

* Download the ROM and GApps * Reboot to Recovery * Wipe data/factory reset * Format System * Flash the ROM and then GAapps * Wipe Cache and Dalvik Cache * Reboot your phone * Enjoy

Code:

* Download the latest version * Reboot to Recovery * Flash the ROM * Wipe dalvik cache and cache * Reboot your phone * And enjoy the latest version of PAC

Code:

* By flashing this, you automatically void your warranty! * If your phone breaks, blows up or runs away from you, do not cry to us! * Do not ask for ETAs!!

Code:

* PAC-Rom site * PAC Forum * PAC Gerrit * PAC Bug Reports * PAC Github * PAC Stats * PAC Google+ * PAC Facebook * PAC Twitter * Want to help Dev or Maintain for PAC-man

Code:

* Mirror 1 : here on xda devdb * Mirror 2: http://pacman.basketbuild.com/index....ariesve/build/ and direct link http://pacman.basketbuild.com/downlo...916-212818.zip * GApps

Help with server costs

Code:

* Cyanogen Team * AOKP Team * Paranoid Android * PAC-man Team * Slim Bean * RootBox * Carbon ROM * Special thanks to Papa Smurf151, blindndumb, BLOWNCO - Stole stuff from OP :) * One2thTEXAN and the PAC Graphix Team - Graphics, logos and images *ADC TEAM *arco68 *camcory

Code:

* OTA is still on beta phase, so until PAC-man Team doesn't make it fully working OTA maybe will not work

XDA:DevDB Information
[GT-I9001][OFFICIAL]PAC-man ROM 4.3 [Galaxy S Plus][ariesve], a ROM for the Samsung Galaxy S I9000

Contributors
krislibaeer
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: i9001
Based On: [CM/AOKP/PA]

Version Information
Status: Alpha
Current Beta Version: 1
Beta Release Date: 2013-09-17

Created 2013-09-16
Last Updated 2013-09-17

↧

[ROM][4.3 JLS36G][GCC 4.7] UNOFFICIAL Carbon [BETA] [WEEKLIES]

September 20, 2013, 12:22 pm

≫ Next: [i9001][CWM Advanced Edition] PhilZ Touch

≪ Previous: [GT-i9001][ROM][JB4.3][OFFICIAL]PAC-man ROM [CM/AOKP/PA]~17-09-13~

About Carbon

CarbonRom is an aftermarket firmware based on the Android Open Source Project. We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.

Please feel free to look at, build, and use our code on CarbonDev GitHub.

We would like to thank CyanogenMod for their device trees, framework/settings mods and their code that was incorporated into this project. We also extend our gratitude to the devs whose code that we have incorporated. Proper authorship has been maintained and can be viewed on our repository.

Special thanks also go to Slim Rom for some of their features, PA, AOKP, and anyone else we may have borrowed commits from that hasn't been mentioned here. If you feel you have been unfairly left out, please - let us know.

While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash!

Features
Simply stated, we can't really list features here. There are too many and they change too frequently, and we now support a truly insane number of devices. Chances are, if you like a feature, we have it already. Seriously.

Changelog

For a detailed changelog, check out the changes made each night here:

Change Log

You can also find a changelog in Settings->Carbon->About Carbon

Screenshots:

More Screenshots available in Screenshots Tab

Credits

Code:

arco

h0rn3t

ADC Team Members (alphabetical order): 

CastagnaIT, Christopher83, Ivendor, Krislibaeer,ktulu84,smeroni68,Xellar

XDA:DevDB Information
[GT-I9001] Unofficial Carbon ROM [4.3], a ROM for the Samsung Galaxy S I9000

Contributors
educk
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.4.x
Based On: AOSP, CyanogenMod

Version Information
Status: Beta
Current Beta Version: 20130920
Beta Release Date: 2013-09-20

Created 2013-09-20
Last Updated 2013-09-22

↧

[i9001][CWM Advanced Edition] PhilZ Touch

September 21, 2013, 6:32 am

≫ Next: [ROM][4.3.1][A3]* iOS 7 * iPHONE V2 NEW!!!

≪ Previous: [ROM][4.3 JLS36G][GCC 4.7] UNOFFICIAL Carbon [BETA] [WEEKLIES]

Main thread + features + install instructions + dev support
http://forum.xda-developers.com/show....php?t=2201860

PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones

It also adds a full touch interface a completely configurable GUI

Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something

To take a screen shot, just slide left

Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut

Download links
Last version can be found here:

Quote:

i9001
http://d-h.st/users/philz_touch/?fld_id=25218#files

Huge thanks to @alireza7991 for providing device sources

↧

[ROM][4.3.1][A3]* iOS 7 * iPHONE V2 NEW!!!

October 23, 2013, 9:01 am

≫ Next: [ROM][4.3][UNOFFICIAL] Slimbean [i9001][beta]

≪ Previous: [i9001][CWM Advanced Edition] PhilZ Touch

Features:

Cm10.2 A3 Based Android 4.3.1 By ADC-Team
iOS 7 like
Music Player like iPhone

Screenshots:

Installation:

Full wipe (dalvik cache system & data ... and internal sdcard for fresh install)
Flash ROM
Flash Gapps
Flash Addons (Required)
Wipe cache and dalvik if bootloop
Set up google account
Choose ilauncher as default and active espier notifications and espier lockscreen
Enjoy...

Download:

Rom -
New Addons -
OLD:

Addons -

Changlog:
New v2 rom => all addonsv2 included and new notification center and statusbar
Added ios 7 control center => New Addonv2

IMPORTANT:

Now i don't know which rom create-port to our phone so pm me if you have an idea!!!

A user asked me to port so just wait the download link :D

↧

[ROM][4.3][UNOFFICIAL] Slimbean [i9001][beta]

October 27, 2013, 11:51 am

≫ Next: [i9001][ROM][4.0.4] M.O.W ROM ICS XE Edition V.1.0 [Fast & Smooth]

≪ Previous: [ROM][4.3.1][A3]* iOS 7 * iPHONE V2 NEW!!!

hey i have some news for you here is the Slimrom compiled from source

this is an UNOFFICIAL build so NO support from SlimRoms Team i keep this rom as it is that is why SlimIRC is included but do not use it it is only for official builds

Standard Disclaimer Your warranty is now void.

I am not responsible for bricked devices, dead SD cards, or any other issues that may arise from flashing this ROM !

WORKING LIST

Code:

Audio

Receiving and making calls

GPS

Compass

Proximity sensor

Wifi

Bluetooth

USB mass storage

HW accelerated gui

HW accelerated video

Camera

BLN

USB/Wifi tethering

VSync



Partially working:

Graphical glitches in Panorama preview

And anything else you can find

DOWNLOADS

Code:

LATEST VERSION

Slim-ariesve-4.3.build.2-UNOFFICIAL-20131028-1056.zip

Code:

PREVIOUS VERSION

Code:

GAPPS

http://www.slimroms.net/index.php/do...dons/downloads

FLASH INSTRUCTION

Code:

Use CWM or TWRP recommend: ADC TEAM recoveries


recommend factory reset/ wipe system


Wipe cache/dalvik cache


flash the downloaded *.zip


flash gapps *.zip (only install once)


reboot phone

CHANGELOG / NOTE

Code:

official changelog

note: the kernel is K^Kernel from christopher83 version 390mb EXUV

CREDITS

Code:

SLIM ROM TEAM

arco68

educk

christopher83

camcory

ADCTeam

all i forgot sorry

XDA:DevDB Information
[GT-I9001][UNOFFICIAL]Slimbean 4.3 [Galaxy S Plus][ariesve], a ROM for the Samsung Galaxy S I9000

Contributors
krislibaeer
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: i9001 ariesve Galaxy S plus
Based On: slimrom

Version Information
Status: Beta
Beta Release Date: 2013-10-27

Created 2013-10-27
Last Updated 2013-10-29

↧

[i9001][ROM][4.0.4] M.O.W ROM ICS XE Edition V.1.0 [Fast & Smooth]

October 29, 2013, 3:46 am

≫ Next: [ROM][JB][4.3.1][JLS36I][WIP] AOSP Unofficial OmniRom

≪ Previous: [ROM][4.3][UNOFFICIAL] Slimbean [i9001][beta]

Hey guys ,

I'am proud to presend you my second custom Rom :D

It's called M.O.W ROM ICS XE Edition.

This Rom is a xperia styled ics rom.

I know that Android 4.0.4 isnt the latest version but the most stable Android version for our device :)

Rom based on CyanogenMod 9 by arco .
Great performance with the K^Kernel by Christopher83
Nice Xperia Look & Feel with Xperia theme , launcher and widgets
A few Xperia Apps
Great Sound with Xperia Walkman by Ibanez7

What's working:

Audio
Receiving and making calls
GPS
Compass
Proximity sensor
Wifi
Bluetooth
USB mass storage
HW accelerated gui
HW accelerated video
Camera
Wifi and USB tethering

What's not working ?

Nothing :D

http://goo.im/gapps

Note: CM for Galaxy S Plus is provided with no warranty. You are installing this software at your own risk. You may be violating your warranty.

Install Guide

Coming from GB or JB 4.1.2 / 4.2.2

Put the zip into the sd card
Do a factory reset
Wipe Cache/Cache Dalvik
Install zip in the recovery
Install gapps

Coming from another ICS 4.0.4 ROM

Put zip into the sd card
Wipe Cache/Cache Dalvik
Install zip in the recovery
Install gapps in the recovery

Credits

Arco68
Christopher83
Ibanez7
ra3al
Nilac8991

Thanks to

Arco 68 for Cm9 EOL :)
Christopher83 for his awesome K^Kernel :D
Ibanez7 for his Xperia Walkman and Media Apps
ra3al for his awesome Xperia Launcher & Widgets
Nilac8991 for his awesome xperia theme :)

If you like this rom, so hit the thanks button

XDA:DevDB Information
M.O.W ROM ICS XE Edition , a ROM for the Samsung Galaxy S I9000

Contributors
TheTechnolgyhelper
ROM OS Version: 4.0.x Ice Cream Sandwich
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Custom Recovery
Based On: CyanogenMod

Version Information
Status: Stable
Current Stable Version: V.1.0
Stable Release Date: 2013-10-29
Current Beta Version: --------------------
Beta Release Date: 1969-12-31

Created 2013-10-29
Last Updated 2013-10-30

↧

[ROM][JB][4.3.1][JLS36I][WIP] AOSP Unofficial OmniRom

October 31, 2013, 11:52 am

≫ Next: [ROM][4.3.1][I9001]Nexus 5 Experience

≪ Previous: [i9001][ROM][4.0.4] M.O.W ROM ICS XE Edition V.1.0 [Fast & Smooth]

This is an unofficial build of Omni for the Samsung Galaxy S Plus (GT-I9001-ariesve). You should consider this a daily driver build.

This is a Work with @SferaDev (Official Maintainer for I9000)

Code:

#include 

/*

 * Your warranty is now void.

 *

 * I am not responsible for bricked devices, dead SD cards,

 * thermonuclear war, or you getting fired because the alarm app failed. Please

 * do some research if you have any concerns about features included in this ROM

 * before flashing it! YOU are choosing to make these modifications, and if

 * you point the finger at me for messing up your device, I will laugh at you.

 */

What's Working
Audio
Receiving and making calls
GPS
Compass
Proximity sensor
Wifi
Bluetooth
USB mass storage
HW accelerated gui
HW accelerated video
Camera
BLNv9
USB/Wifi tethering
VSync
USB OTG (Only FAT32 support)
Phantom key presses filtering

XDA:DevDB Information
[WIP] OmniRom GT-I9001, a ROM for the Samsung Galaxy S I9000

Contributors
davidteri91, SferaDev, DevConnection_Team
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.4.x
Based On: OmniRom

Version Information
Status: Beta

Created 2013-10-31
Last Updated 2013-10-31

↧

[ROM][4.3.1][I9001]Nexus 5 Experience

November 10, 2013, 3:23 am

≫ Next: Project porting msm-3.10 kernel to ariesve?

≪ Previous: [ROM][JB][4.3.1][JLS36I][WIP] AOSP Unofficial OmniRom

Hy guys, I'm proud to launch a new ROM from BunnyTEAM Developers.
We had a difficult period and that's why we didn't launch or update our existing ROMs.

Since there is no android 4.4 for our device, i decided to port and to make a 4.3.1 android rom with android 4.4 apps and add-ons.

This is the first version so it is not bug free. Every bug you find please tell me

NEW Don't use this rom as a daily rom. We have found some bugs and we will correct them shortly so don't try this unless you are a tester/advanced person who want to help us discover more bugs

Known bugs:
- google keyboard force close
- google search not working = not working android 4.4 launcher
- hangouts give force close

Changelog v1.0.0:

added Hangouts
added nexus 5 launcher
added quickoffice
added android 4.4 camera and gallery
added android 4.4 e-mail app
added nexus bootanimation
edited build.prop to show android version 4.4
other android 4.4 stuff which i forgot

Screenshots will be added shortly

Download link:link

Gapps: same android 4.4 gapps from cm10.2
Android 4.4 Wallpapers : link

Our official webpage: Link
Our official facebook page : link

↧

Project porting msm-3.10 kernel to ariesve?

November 18, 2013, 6:37 am

≫ Next: [ROM][JB 4.2.2][CM10.1] JELLY KAT-4.4 Mod, Galaxy S Plus GT-I9001

≪ Previous: [ROM][4.3.1][I9001]Nexus 5 Experience

Hello everybody,

First of all this is not yet an announcement for a project.
I'd like to know if there are people already working on this task or not.
If not I hope some people are interested in teaming up to port over the msm-3.10 kernel to ariesve just like arco, ivendor and the AriesVE_Dev_Connection team has done for kernel 3.0 and the 3.4 kernels.
At the moment there isn't a android version which uses the 3.10 kernel as far as I know, but because the source is already available on the AOSP repository and also in the CodeAurora github this hints a version which ships with kernel 3.10 will land in the near future.
Of course I can't exactly tell what the changes between the 3.4 and 3.10 kernel exactly are because this is a very big list.
You have to think in terms of bug fixing, power enhancements, updated drivers and code for filesystems etc.
So if you have some knowledge with the linux kernel, programming, patching, and with git please leave a message in this post.

Greetings PsychoGame

↧

[ROM][JB 4.2.2][CM10.1] JELLY KAT-4.4 Mod, Galaxy S Plus GT-I9001

November 18, 2013, 7:14 am

≫ Next: Delete

≪ Previous: Project porting msm-3.10 kernel to ariesve?

ROM JELLY KAT - 4.4 Mod

Quote:

hi,all
As we know , we haven't eat kitkat by now but I believe ADC team will work on that.
I had ported a rom looks like and feel like KitKat from I8150, this bring you kitkat feel and looks in CM10.1

All news and screenshot are on original thread started by @Adi Aisiteru Reborn

YOUTUBE PREVIEW

Rom information :
- Base CyanogenMod 10.1 by DevConnection_Team
- Stock CM10.1 updated kernel
- No additional init.d tweak

Feature :
- 4.4 Latest GoogleApps, port from P.A. 4.4 Gapps & Nexus 5 system dump
( Google+, GoogleHome launcher, GooglePhoto, GoogleCamera, GoogleGallery, GoogleKeyboard, GoogleCalendar, Keep, Youtube, PlayMusic, Play game, Hangouts, Earth, Quickoffice, Play books, Gmail, GoogleNow, News/ Weather )

- 4.4 framework theme

- 4.4 style status bar UI

- Moded Holo light ( Dialer, Contact, MMS buble )

- Nexus 7 framework transition animation ,
Note !! , go to Developer Options & set all Animation scale to 0,5 :
Window animation scale : 0,5
Transition animation scale : 0,5
Animator duration scale : 0,5

- Vertical CRT off effect

- Status bar background style port from crDroid S.3 rom ( Transparent/color )

- Clock style port from crDroid S.3 rom ( center/right, add date, date format, color )

- Expanded date & clock color

- 13 battery style port from Carbon rom
( Icon only, Text only, Icon with text, Icon with centered text, Circle, Circle w/ percent, Dotted w percent, Speedometer, Squaremod, Gear, CM skinny battery, Carbon, Don't show )

- Circle battery option port from Carbon rom ( color/charge animation speed )

- Network speed indicator port from Carbon rom ( Thingking bridge/ChaOS ) color style

- Navigatior bar style port from crDroid S.3 rom
( height/hide/background/transparent/color ) Transparent navbar only work with Apex/Nova launcher

- Sense 4 recent apps

- Mod KIT KAT Bootanimation

- Nexus 5 Audio ringtones, notifications, alarms, ui.

- Nexus 5 default wallpaper

CM Apps removed :
- All live wallpaper
- Video editor
- Apollo music player
- Calendar
- Trebuchet
- CM Walpaper
- CM Bootanimation
- CM Audio ringtones, notifications, alarms, ui

Credit & Thanks :
- Adi Aisiteru Reborn
- DevConnection_Team
- Recognized developer Arco
- Recognized developer Educt
- Cristiano Matos
- crDroid team
- CyanogenMod team
- CyanogenMod 11 team Moto defy
- Carbon Rom team
- Paranoid Android team
- Nexus 5 XDA forum
- daledenton
- iCloud
- CPA Poke
- and to all people I ve borrow their work/mod

↧

Delete

November 20, 2013, 12:45 pm

≫ Next: [9001][ROM][PMEM][KK][4.4][KRT16S] CyanogenMod 11.0 by ADC-Team - Kernel 3.4.x

≪ Previous: [ROM][JB 4.2.2][CM10.1] JELLY KAT-4.4 Mod, Galaxy S Plus GT-I9001

Delete

↧

[9001][ROM][PMEM][KK][4.4][KRT16S] CyanogenMod 11.0 by ADC-Team - Kernel 3.4.x

November 25, 2013, 12:23 pm

≫ Next: [KERNEL][3.4.70][KK] K^Kernel 3.4.70 v1.0 for KK 4.4 [25/11/2013]

≪ Previous: Delete

Hi everyone,
We are back! And we are proud to present our build of CyanogenMod 11.0 for the Galaxy S Plus (GT-I9001).

Currently the team is composed by the following members: (in alphabethic order)

[Dev] CastagnaIT, Christopher83, Educk, Ivendor, Krislibaeer
[Tester] smeroni68, ktulu84, Xellar

What's working:
Audio
Receiving and making calls
GPS
Compass
Proximity sensor
Wifi
Bluetooth
USB mass storage
HW accelerated gui
HW accelerated video
Camera
BLNv9
USB/Wifi tethering
VSync
USB OTG (Only FAT32 support)
Phantom key presses filtering

Partially working:
Some graphical glitches in Panorama preview
Web browsing with stock brower not really good (install Chrome or other browser for better use)
The first switching from 2G to 3G takes around 1 minute or more, then it's faster (set WCDMA preferred from *#*#4636#*#* hidden menu, Phone Info to have faster switch)
Quick panel tiles are not fully functional (eg: 2G/3G tile is not working)

Not working:
Screenshot are not working (screens are grey)
Multi-tasking Preview does not work

Screenshots

CM11.0Installation Guide

Note: CM for Galaxy S Plus is provided with no warranty. You are installing this software at your own risk. You may be violating your warranty.

Download CM11.0 and gapps-jb zips and put them in /sdcard

20131124 Alpha 1 (DL from Dev-Host)
MD5SUM: 877c516052ff1303a1ae84a6a8962cb1

ROM:
- Change some mount points (credits to Arco68)
- ariesve: switch to kernel build during compile rom (credits to krislibaeer)
- Initial support for the hardware tunables framework (credits to Czobor)
- Overlay: Add custom arrays to base frameworks (credits to erik96)
- BoardConfig: woraround create the folder /usr to prevent the build from failing (credits to krislibaeer)
- Disable PhaseBeam scrolling (credits to Michael Bestas)
- Set ro.telephony.call_ring.multiple=0 (credits to Arco68)
- ril: Updates for Android 4.4 alias kitkat (credits to krislibaeer)
- BoardConfig: Use cortex-a8 error on scorpion (credits to krislibaeer)
- libsensors: fix build error (credits to krislibaeer)
- overlay: remove disable the home key unlock settings in frameworks_base for now (credits to krislibaeer)
- recovery: change graphics.c to fit with new changes (credits to krislibaeer)
- BoardConfig: add TARGET_RUNNING_WITHOUT_SYNC_FRAMEWORK := true new feature on 4.4 (credits to krislibaeer)
- ariesve: add ro.config.low_ram new feature on android 4.4 (credits to krislibaeer)
- ramdisk: apply changes to wlan to get it working (credits to krislibaeer)
- BoardConfig: add USE_SET_METADATA := false, for now we need this because otherwise the flashable zip is not flashable (credits to krislibaeer)
- overlay:apps: change Phone to Telephony (credits to krislibaeer)
- ramdisk: changes to sdcard mount Android 4.4 (credits to krislibaeer)
- ariesve: add a bit debug stuff (credits to krislibaeer)
- sepolicy: Add policy configuration for SELinux (credits to Christopher83)
- ril: fix sim PIN handling (credits to Pawit Pornkitprasan)
- ariesve: build memtrack (credits to krislibaeer)
- ramdisk: change also usbdisk mount for android 4.4 (credits to krislibaeer)
- BoardConfig: add flag BOARD_EGL_WORKAROUND_BUG_10194508 := true (credits to krislibaeer)
- BoardConfig: let camera working again (credits to krislibaeer)
- overlay: add Enable lockscreen translucent decor (credits to krislibaeer)
- ramdisk: add KSM by default (credits to krislibaeer)
- ariesve: Disable JIT cache (credits to krislibaeer)
- ariesve: disable preloading of EGL/GL drivers in Zygote at boot time (credits to krislibaeer)
- overlay: add extraFreeKbytes - new feature Android 4.4 (credits to krislibaeer)
- AriesParts: add low_ram switch (credits to krislibaeer)
- ril: aligned custom ariesve ril to SamsungExynos3RIL (credits to CastagnaIT)
- Corrected the ril property and some updates (credits to CastagnaIT)
- BoardConfig: removed no longer needed BOARD_USE_LEGACY_TOUCHSCREEN (credits to CastagnaIT)
20131124 KERNEL: (DL from Dev-Host)
MD5SUM: 0560e06571327b4076029e75e84b3483

ATTENTION: This kernel is included in the rom... this download is in case of custom kernel installed and want to come back to stock!
- Kernel 3.4.70
- msm: kgsl: Avoid turning on GPU clock if already off (credits to Ananta Kishore K)
- Update defconfigs to enable some netfilter options (credits to Christopher83)
- Revert "ALSA: fix oops in snd_pcm_info() caused by ASoC DPCM" (credits to Christopher83)
- Add exFAT support (credits to radu) (Tested on Samsung 64GB SDXC uhs1 PRO card)
- Update defconfigs for exFAT support (credits to Christopher83)
- msm: vidc: Reset stop_called state when START is called (credits to Deepak Verma)
- msm: vidc: set EOS on output buffer pending transaction (credits to Deepak Verma)
- Clone ion.h to msm_ion.h (credits to Arco68)
- Add extra free kbytes tunable (credits to Rik van Riel)
- input: Updates to Phantom Key Presses filter (credits to Christopher83)
- SELinux: include definition of new capabilities (credits to Eric Paris)
- msm: vidc: Check validity of userspace address (credits to Deepak Verma)
- ALSA: pcm: check for integer overflow during multiplication (credits to Phani Kumar Uppalapati)
- base: genlock: Zero a structure before sending it to user space (credits to Jordan Crouse)
- qt602240_ts: updated touchscreen driver in according of Multi-touch protocol (credits to CastagnaIT)

20131116 ADCT GApps (DL from Dev-Host)
MD5SUM: 381d117be483cf672ac33887d212d765

Please verify the md5sum to be sure you got the right one.

Previous versions:

Before you install CM11.0: Preparation (First three are optional. If you want to start fresh, these can be skipped)

Install AppBak from Market, run it and save a list of all your apps.
Install SMS Backup and Restore from Market, run it and backup your SMS history.
Install Call Logs Backup and Restore from Market, run it and backup your call log history.
Boot into recovery. Make a full backup. You will need this backup later if you decide to go back to your previous ROM and data.

WARNING: Many apps will Force Close crash if you restore data from a previous ROM.

Install

Here you can find the CWM Recovery and TWRP built by our Team:

CWM & TWRP Thread

WARNING: We built and tested these recoveries, but always remember that we are not responsible for any damage by using these software!!
They are based on safe kernel on emmc side!!
Wipe data and cache.
Flash update*.zip.
Flash gapps*.zip. You must flash gapps after every upgrade to CM10 since /system is formatted, wiping your previous add-ons.
Reboot phone.
After you setup your Google account, reinstall the three apps from Market in order to restore most of your apps, call log and SMS history.

WARNING: Do not restore backup data of system apps!

If you restore a bad backup with cached settings in telephony.db in data/data/com.*.*.telephony it can break MMS.
It seems that restoring backups can also break Calendar sync.

Upgrades
Upgrades from previous versions of CM11.0 are the same process as install, except you do not need to wipe anything. Contrary to popular belief, you do not need to even wipe cache and dalvik-cache when upgrading between CM11.0 versions. You only need to wipe if you are doing a major upgrade, switching to a different ROM entirely, or attempting to fix bugs caused by bad backups or corrupt app data.

Credits
CyanogenMod Team
Arco68 for his huge work for our device
AriesVE Dev Connection Team
Nello96 for Team logo's
anakin174 for the team spare phone

Sources
All our sources are on AriesVE-DevCon-TEAM GitHub

FAQ

For recovery bootloop problem you should at this post
BLNv9 feature recap:
- It is activable/deactivable from BLN Control Application (Free or Pro version)
- You can launch it from Settings->Device->Advanced

XDA:DevDB Information
[GT-I9001][KK 4.4] CyanogenMod 11.0 by ADC-Team - Kernel 3.4.x, a ROM for the Samsung Galaxy S I9000

Contributors
DevConnection_Team, CastagnaIT, Christopher83, educk, ivendor, krislibaeer, smeroni68, ktulu84, XeLLaR*
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod

Version Information
Status: Alpha

Created 2013-11-25
Last Updated 2013-11-25

↧

[KERNEL][3.4.70][KK] K^Kernel 3.4.70 v1.0 for KK 4.4 [25/11/2013]

November 25, 2013, 2:38 pm

≫ Next: [Q] Problem about CyanogenMod 10.1

≪ Previous: [9001][ROM][PMEM][KK][4.4][KRT16S] CyanogenMod 11.0 by ADC-Team - Kernel 3.4.x

In this thread you may find my customized kernel 3.4.x for KitKat rom (CM 11 and derivatives).
Of course, your feedback, as always, are welcome and certainly valuable.

The main features are the following:
- Kernel 3.4.x
- Sources synched with cm-11.0 repo branch of DevCon Team
- Built with my custom Linaro 4.8.3-2013.11 toolchain optimized for Cortex-A8
- Built with Cortex-A8 and NEON VFP optimization flags (both kernel and modules)
- Built with -O3 optimization flag (both kernel and modules)
- CPU overclockable up to 1824 MHz
- CPU frequencies undervolted (UV version) or extremely undervolted (EXUV version)
- CPU voltage control VDD sys interface (click for more details)
- 360MB, 370MB or 390MB of free RAM
- Init.d support
- Fast Charge support (default disabled, click for more details)
- Battery Life eXtender support (default disabled, click for more details)
- Ram Console support (click for more details)
- Backlight Notification v9 (BLNv9) (click for more details)
- USB OTG support (if also implemented on rom side)
- Customizable vibration intensity (click for more details)
- Lowered display panel voltage
- Lowered touchscreen voltage
- Lowered wifi voltage
- Lowered swappiness (60 -> 45)
- Increased CPU frequency during boot
- Optimized AES and SHA1 routines for ARM cpu architecture
- Fixed 100% battery notification after charger unplug
- Increased audio volume on board side
- Con Kolivas' CK3 Tweaks
- Optimized SLUB memory allocator
- Optimized ARM RWSEM (read/write semaphore) algorithm
- Optimized asynchronous I/O latency on solid state disks
- Disabled Gentle Fair Sleepers for better UI performance
- Filesystem dynamic read-ahead (based on disk size)
- CIFS support on boot
- Memory compaction
- Dynamic compression of clean pagecache pages
- Fast Random generator (frandom) support (click for more details)
- New display drivers from Samsung Galaxy SII
- Updated light sensor driver and display driver light sensor changes
- Updated sensor drivers
- Phantom key presses filter (click for more details)
- Dynamic FSync v1.2 (click for more details)
- Dynamic dirty page writebacks (click for more details)
- VM tweaks for performance and less battery consumption
- Revised LowMemoryKiller parameters for better performance (click for more details)
- Customizable timeout for touchkeys backlight after a key press or touchscreen press (click for more details)
- Customizable activation status of touchkeys backlight on touchscreen press (click for more details)
- Timer slack controller (click for more details)
- Dynamic management of the minimal timer slack value during suspend/resume (click for more details)
- LowMemoryKiller management of not killable processes (click for more details)
- exFAT support
- Additional TCP Congestion algorithms

Available CPU governors:
- Adaptive
- BrazilianWax
- Conservative
- Hyper
- Intellidemand
- Interactive
- InteractiveX
- LionHeart
- LulzActive
- OnDemand (default)
- OnDemandX
- Performance
- Powersave
- SmartAssV2

Available I/O schedulers:
- BFQ
- CFQ
- Deadline
- Fiops
- Noop
- ROW
- SIO (default)
- V(R)

Kernel Downloads for KitKat:

K^Kernel KK-4.4 Mediafire Folder

- v1.0 -
for ADC CM 11.0 Alpha 1
and the other roms based on this latest CM 11.0

Howto install the kernel:
1) Download the preferred kernel zip file to sdcard or external sdcard
2) Reboot to recovery mode
3) Flash the kernel zip file
4) Wipe cache and dalvik cache
5) Reboot the system

Kernel sources (on GitHub):

Development branch of K^Kernel 3.4 for KK 4.4

Useful info:
- Special features and sysfs settings
- Frequently asked questions

Rom and kernel 3.4.x known problems:
- For the builds with 390MB of free RAM, the camera works and the video recording works only in 480p mode

Tables:

Changelog:

Code:

24/11/2013 - K^Kernel 3.4 v1.0 for KitKat

- Initial release

- Kernel 3.4.70

- Sources synched with cm-11.0 repo branches of DevCon Team

- Built with my latest custom Linaro 4.8.3-2013.11 toolchain optimized for Cortex-A8

- msm: kgsl: Avoid turning on GPU clock if already off (credits to Ananta Kishore K)

- Update defconfigs to enable some netfilter options (credits to Christopher83)

- Revert "ALSA: fix oops in snd_pcm_info() caused by ASoC DPCM" (credits to Christopher83)

- Update default and custom defconfigs for additional TCP Congestion algorithms (credits to Christopher83)

- Add exfat support (credits to radu)

- Update default and custom defconfigs for exFat support (credits to Christopher83)

- msm: vidc: Reset stop_called state when START is called (credits to Deepak Verma)

- msm: vidc: set EOS on output buffer pending transaction (credits to Deepak Verma)

- Clone ion.h to msm_ion.h (credits to Arco68)

- acpuclock-7x30: Raised some standard UV and stock voltages for high OC cpu frequencies (credits to Christopher83)

- Add extra free kbytes tunable (credits to Rik van Riel)

- input: Updates to Phantom Key Presses filter (credits to Christopher83)

- SELinux: include definition of new capabilities (credits to Eric Paris)

- msm: vidc: Check validity of userspace address (credits to Deepak Verma)

- ALSA: pcm: check for integer overflow during multiplication (credits to Phani Kumar Uppalapati)

- base: genlock: Zero a structure before sending it to user space (credits to Jordan Crouse)

- softirq: reduce latencies (credits to Eric Dumazet)

- fs: vfat: reduce the worst case latencies (credits to xiaogang)

- jiffies conversions: Use compile time constants when possible (credits to Joe Perches)

- qt602240_ts: updated touchscreen driver in according of Multi-touch protocol (credits to CastagnaIT)

Credits and Thanks to:
Arco68, CastagnaIT and Ivendor for their awesome work and their kernel sources
Ezekeel, Doomlord, Faux123, Stratosk, Tegrak, ErasmuX, Imoseyon and other devs I'm surely missing
CyanogenMod, Kernel.org, Code Aurora Forum, Google, Linaro GCC developers
KTulu84, Smeroni68, XeLLaR* for their support in testing
Sament83, B1tt1, Dellup, Pierm, Leonbeson, Cippoz89 and Marco Z. for their donations

XDA:DevDB Information
[GT-I9001] K^Kernel 3.4 for KK 4.4, a Kernel for the Samsung Galaxy S I9000

Contributors
Christopher83
Kernel Special Features: Customized kernel 3.4.x for JB 4.2.2 and JB 4.3 rom (CM 10.1, CM 10.2 and derivatives)

Version Information
Status: Stable
Current Stable Version: v1.0
Stable Release Date: 2013-11-25

Created 2013-11-25
Last Updated 2013-11-26

↧

[Q] Problem about CyanogenMod 10.1

November 26, 2013, 2:22 am

≫ Next: [ROM][KitKat][KRT16S] Unofficial ParanoidAndroid 4.0

≪ Previous: [KERNEL][3.4.70][KK] K^Kernel 3.4.70 v1.0 for KK 4.4 [25/11/2013]

I had flash CyanogenMod 10.1 from a website but it didn't tell me to flash CWM 5.5.0.4 before flash the Rom
Therefore now my S Plus now hang at the starting
How can I solve the problem?

↧

[ROM][KitKat][KRT16S] Unofficial ParanoidAndroid 4.0

November 26, 2013, 9:13 am

≫ Next: [ROM][i9001][4.4.2] PhenNnom's KitKat v2.0 TouchWiz Edition (S4 Look) #FAST #STABLE

≪ Previous: [Q] Problem about CyanogenMod 10.1

This is an Unofficial build of PA 4+ for the Samsung Galaxy S Plus (ariesve). You should consider this an Alpha Candidate of Paranoid Android 4.0. It has Android 4.4 based!

Code:

#include 

/*

 * Your warranty is now void.

 *

 * I am not responsible for bricked devices, dead SD cards,

 * thermonuclear war, or you getting fired because the alarm app failed. Please

 * do some research if you have any concerns about features included in this ROM

 * before flashing it! YOU are choosing to make these modifications, and if

 * you point the finger at me for messing up your device, I will laugh at you.

 */

What's working:
Audio
Receiving and making calls
GPS
Compass
Proximity sensor
Wifi
Bluetooth
USB mass storage
HW accelerated gui
HW accelerated video
Camera
BLNv9
USB/Wifi tethering
VSync
USB OTG (Only FAT32 support)
Phantom key presses filtering

Partially working:
Some graphical glitches in Panorama preview
Web browsing with stock brower not really good (install Chrome or other browser for better use)

XDA:DevDB Information
ParanoidAndroid, a ROM for the Samsung Galaxy S I9000

Contributors
davidteri91, DevConnection_Team, MikeNG, ParanoidAndroid Team
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: ParanoidAndroid

Version Information
Status: Alpha

Created 2013-11-26
Last Updated 2013-11-26

↧

[ROM][i9001][4.4.2] PhenNnom's KitKat v2.0 TouchWiz Edition (S4 Look) #FAST #STABLE

December 6, 2013, 11:30 am

≫ Next: [ROM][i9001][4.4] PhenNnom's KitKat v1.0 STABLE & FAST

≪ Previous: [ROM][KitKat][KRT16S] Unofficial ParanoidAndroid 4.0

PhenNnom's KitKat v2.0 TouchWiz Edition

Best S4 experience on i9001
First KitKat based rom, with TouchWiz for i9001
With Android KitKat your i9001 runs faster, without lags.
Be careful : THIS ROM IS STABLE =]

*****From Romania. For Romania and not only that !

Features v2.0
K^Kernel removed, but can be flashed
Updated source : 4.4.2 based !
S4 Look - FULL TOUCHWIZZED (Icons, menus, dialer, settings, launcher, etc)
S4 Widgets
S4 Apps - S Memo, S Voice, Samsung Apps, Task Manager.. Just good apps, not bloatware !
Removed some ugly wallpapers.
Fixed screen artifacts presents in other builds of CM11.
Build.prop tweaks !

Features v1.0:
K^Kernel with overclock possibility up to 1.8ghz.
A new & customizable KitKat Launcher. You can add "Swipe to left -> Google Now"
Build.prop tweaks

Working:
Audio
Phone
GPS
Wi-Fi
Wi-fi Tether
Bluetooth
Brightness
Sensors (proximity, accelerometer, etc)
3G/EDGE/H/

Not working:
You tell me

Tip:
Format system/data/cache partitions, and clear Dalvik Cache.
Rom can be installed from any recovery, but i recommend to use TWRP

Thanks :
XDA-Devs
CyanogenMod
ADC-Team
Nilac8991
K^Kernel developer.
Screenshots : In Youtube video, or attachments !
Download : In YOUTUBE DESCRIPTION !!!.

If you like my work, you can press Thanks button, or make a small donation to me ! PayPal : overstudiorecords@yahoo.com
I will make a list of donors

Attached Thumbnails

Click image for larger version

Name: Screenshot_2013-12-11-21-52-37.jpg
Views: N/A
Size: 58.7 KB
ID: 2448632

Click image for larger version

Name: Screenshot_2013-12-11-21-52-55.png
Views: N/A
Size: 63.7 KB
ID: 2448633

↧

[ROM][i9001][4.4] PhenNnom's KitKat v1.0 STABLE & FAST

December 7, 2013, 3:25 am

≫ Next: [i9001][ROM][KK][KOT49E][4.4.1]MoKee OpenSource Project 44.1 (2013-12-08)

≪ Previous: [ROM][i9001][4.4.2] PhenNnom's KitKat v2.0 TouchWiz Edition (S4 Look) #FAST #STABLE

A new rom based on CM11 ported by ADC-Team

Features :
K^Kernel with overclock possibility up to 1.8ghz.
A new & customizable KitKat Launcher. You can add "Swipe to left -> Google Now"
Build.prop tweaks

Working:
Audio
Phone
GPS
Wi-Fi
Wi-fi Tether
Bluetooth
Brightness
Sensors (proximity, accelerometer, etc)
3G/EDGE/H/

Not working:
You tell me

Thanks :
XDA-Devs
Cyanogen
ADC-Team
K^Kernel developer.

Download : In youtube description.

↧

[i9001][ROM][KK][KOT49E][4.4.1]MoKee OpenSource Project 44.1 (2013-12-08)

December 8, 2013, 4:24 am

≫ Next: [ROM][i9001][4.3.1] KFeel v1.0 by PhenNnom (Stable,fast,KitKat look)

≪ Previous: [ROM][i9001][4.4] PhenNnom's KitKat v1.0 STABLE & FAST

Code:

All the firmwares, custom ROMs, official firmware updates, mods and tools mentioned here belong to their respective developers/owners.



You will be doing everything at your own risk. 



We nor the developers cannot be held responsible if you end up damaging or bricking your device.

About MoKee OpenSource
MoKee OpenSource is based on the Google AOSP and CyanogeMod project. We update our source code frequently to keep up with the latest development, and not forgetting to merge in special features of our own at the same time.
The Mfunz Forums launched this project on the 12th of December 2012, and is committed to make this ROM better and better.
Since this project is open source, anyone interested can participate in the development. Newcomers are always welcomed!

Official website: http://www.mfunz.com
Statistics: http://stats.mfunz.com
Review: http://review.mfunz.com
Bug Tracker: http://issues.mfunz.com/
Bug Tracker Mobi: http://issues.mfunz.com/mobi
Source: https://github.com/MoKee

FEATURES
*Note:Some features haven't add in alpha built by now (for example,Halo and PIE) don't worry , in the feature mokee team will do it.
- cLock Lockscreen and Homescreen widget
- HALO
- PIE control
- Calendar - with lunar and solar calenders
- Lunar calendar in lock screen
- Task switching sidebar in recent apps (the list will increase if you install supported apps)
- Bulk SMS recipients
- Adjustable SMS font size
- Smart dialing
- IP dialing
- Adjustable navigation bar height
- Custom transparency for status bar and navigation bar
- Built in timer in Apollo - determine when to stop playing music
- CRT animation switch
- Custom operator name
- Network speed in status bar
- Preview option in launcher (similar to the preview function in launchers found in Play Store)
- Permissions Manager
- MoKee NotePad
- ListView animations
- global time refinement
- localization optimization and adjustment
- smart dialing optimization
- Volume Rocker Wake
- Split QS actionable area
- more

Working
Audio
Receiving and making calls
GPS
Compass
Proximity sensor
Wifi
Bluetooth
USB mass storage
HW accelerated gui
HW accelerated video
Camera
BLNv9
USB/Wifi tethering
VSync
USB OTG (Only FAT32 support)
Phantom key presses filtering

NOT Working
Default brower work not reall well (use Chrome instead of)
OTA update in Mokee Center is not working because we are unofficial build

SCREENSHOTS

Install Guide
Go to recovery using CWM6 / TWRP by ADC team
Wipe data, cache and Dalvik cache
Flash the rom file *.zip.
Flash GAPPS (get it from ADC or ZordanKV if you need)
Reboot
*Note: Upgrades from Mokee previous version needn't wipe anything .

Credits
martincz
DevConnection_Team
davidteri91
krislibaeer
*note:all my source come from ADC-team and davidteri91,most credits belong to them, i just do a little.
I'd like to say thank you to krislibaeer and davidteri91 ,who help me a lot a lot

XDA:DevDB Information
MoKee OpenSource Project 44.1, a ROM for the Samsung Galaxy S I9000

Contributors
zxc123coke, DevConnection_Team, davidteri91
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod + Mokee

Version Information
Status: Alpha

Created 2013-12-08
Last Updated 2013-12-10

↧

[ROM][i9001][4.3.1] KFeel v1.0 by PhenNnom (Stable,fast,KitKat look)

December 8, 2013, 12:33 pm

≫ Next: [ROM][KK][4.4.1][KOT49E] SamsungKK ROM v.1 by Diavex Team

≪ Previous: [i9001][ROM][KK][KOT49E][4.4.1]MoKee OpenSource Project 44.1 (2013-12-08)

I want to present my new ROM based on CyanogenMod 10.2 (Android 4.3.1)
This runs fast, is stable & customizable.

Features:
-Battery friendly.
-Android 4.4 launcher ported to this ROM.
-Google Search updated to 3.1.8
-Overclock by default. This rom contains K^Kernel (Thanks to developer)
-More free RAM (K^Kernel)
-Simple MIUI Music v3 application
-Build.prop tweaks for increase performance.

Bugs :
You tell me

DOWNLOAD LINK : IN YOUTUBE DESCRIPTION

↧